濟南彩鋼瓦現在被普遍使用并發揮偏重要作用，但正確效果的使用仍舊重要。接下來，小編為您介紹彩鋼瓦的正確使用技巧。

Jinan color steel tiles are now widely used and play an important role, but the use of the correct effect is still important. Next, I will introduce you the correct use of color steel tiles.

1、彩鋼瓦的螺栓頭使用不怕水材料密封，以防止外部影響導致生銹。

1. The bolt heads of color steel tiles are sealed with water-proof materials to prevent rust caused by external influences.

2、如果產品由于差別的外部因素和銹斑，應刮掉銹跡，刷或噴相像顏色的油漆。

2. If the product has different external factors and rust spots, the rust shall be scraped off and the paint of similar color shall be brushed or sprayed.

3、根據設計要求進行選擇，因為所有廠家的產品都差別，為了包管工作的順利實現，應該由同一公司同一規格的產品。

3. The selection shall be made according to the design requirements. Because the products of all manufacturers are different, in order to ensure the smooth implementation of the work, the products of the same company and the same specification shall be used.

4、起重和運輸過程，防止產品漆膜損壞、表面玷污和碰撞。

4. During lifting and transportation, prevent the product paint film from damage, surface contamination and collision.

5、儲存、運輸和使用應遠離酸、堿、鹽、有機溶劑和其余侵蝕性物質；

5. Keep away from acid, alkali, salt, organic solvent and other aggressive substances during storage, transportation and use;

6、在運輸時，層和層被薄膜物質的使用隔開，以避免相對滑動和產生磨損。

6. During transportation, layers and layers are separated by the use of film materials to avoid relative sliding and wear.

7、彩鋼瓦加工的環境溫度應高于7攝氏度，根據板的厚度調整加工輥系統的間隙，并去掉滾輪表面和拖板上的異物，同時搜檢板材的雙側是否脫漆，如脫皮，應查明緣故，并采取措施繼續處置。

7. The ambient temperature for color steel tile processing shall be higher than 7 ℃. Adjust the gap of the processing roller system according to the thickness of the plate, remove the foreign matters on the roller surface and the carriage, and check whether the two sides of the plate are peeling. If peeling occurs, find out the cause and take measures to continue to deal with it.

8、在正常天色條件下使用，如屋頂產品坡度不低于10度。

8. Use under normal weather conditions, such as the slope of roof products is not less than 10 degrees.

9、嚴禁用切割機切割彩鋼瓦，避免因切割而產生高溫金屬粉末，避免粘在產品銹蝕。

9. It is strictly prohibited to use a cutting machine to cut color steel tiles, so as to avoid the generation of high-temperature metal powder due to cutting, and avoid sticking to the product rust.

所以說，使用彩鋼瓦您可以參考這9點操作，當然其中每個細節要多了解，關注我們http://m.gp552.com了解更多相關事項！

Therefore, you can refer to these 9 operations when using color steel tiles. Of course, you should learn more about each detail and pay attention to us http://m.gp552.com Learn more!